Single Acting Cylinders

  • Capacity : 5 - 100 tons
  • Stroke : 50 - 200mm
  • Maximum Pressure : 700kgf/cm2
  • Hydraulic Coupler : 3/8" PT
  • Pump : To use 30% more than oil capacity of Cylinder

Double Acting Cylinders

  • Capacity : 5 - 1000 tons
  • Stroke : 150 - 300mm
  • Maximum Pressure : 700kgf/cm2
  • Hydraulic Coupler : 3/8" PT
  • Faster Retraction under hydraulic power
  • Removable plunger caps

Shorty Cylinders

  • Capacity : 10 - 200 tons
  • Stroke : 44 - 50mm
  • Maximum Pressure : 700 kgf/cm2
  • Hydraulic Coupler : 3/8 PT
  • Compact, flat design for use where other cylinders will not fit.

Low Profile Cylinders

  • Capacity : 10 - 150tons
  • Stroke : 11 - 16mm
  • Maximum Pressure : 700kgf/cm2
  • Hydraulic Coupler : 3/8" PT
  • TECPOS low profile cylinders are designed for use where there is a minimum of clearance for insertion of cylinders
  • From 10 to 150 tons capacity single-acting spring Return

Single Acting Center Hole Cylinders

  • Capacity : 10 - 100 tons
  • Stroke : 41 - 75mm
  • Maximum Pressure : 700kgf/cm2
  • Hydraulic Coupler : 3/8" PT
  • Designed for use with screws, rods, cables and Pullers

Double Acting Center Hole Cylinders

  • Capacity : 5 - 1000 tons
  • Stroke : 156 - 254mm
  • Maximum Pressure : 700kgf/cm2
  • Hydraulic Coupler : 3/8" PT
  • Designed for use with screws, rods, cables, etc.

Aluminum Cylinders

  • Capacity : 20 - 150 tons
  • Stroke : 50 - 150mm
  • Maximum Pressure : 700kgf/cm2
  • Hydraulic Coupler : 3/8" PT
  • TECPOS Aluminium cylinders are almost half the weight if steel cylinders.

Lock Nut Cylinders

  • Capacity : 30 - 200 tons
  • Stroke : 200 - 230mm
  • Maximum Pressure : 700kgf/cm2
  • Hydraulic Coupler : 3/8" PT
  • Cylinders are load return and spring return
  • Particularly use in the building industry to support a bridge during construction

Hydraulic Hand Pumps

  • Reservoir Capacity : 280 - 10000 cc
  • Volume per stroke : 1 - 7 cc/stroke
  • Maximum Pressure : 700 kgf/cm2
  • To order double acting hand pump add the letter "D" to the model No. ex) THP-3A-D

Hydraulic Punch

  • Capacity : 32 ton, 47 ton, 60 ton
  • Maximum Punching Diameter : φ 24
  • Maximum Pressure : 700 kgf/cm2
  • Punching through I-Beams, H-Beams, Mild steel, etc.

Floor Cranes

  • Capacity : 500 - 2000 Kgs
  • Beam Length : 1500 - 2500mm
  • Safety Mechanical Lock
  • Pump operated by manual
  • Adjustable Height, Beam Length & Legs
  • Compact & Movable

Hydraulic Pipe Benders

  • Cylinder : 2", 3", 4"
  • Maximum Pressure : 700kgf/cm2
  • Stroke : 255 - 300mm
  • Capacity : 10 - 20 tons

Aluminum Pulling Jacks

  • Capacity : 10 - 50 tons
  • Stroke : 150mm - 200mm
  • Maximum Pressure : 700kgf/cm2
  • Hydraulic Coupler : 3/8" PT
  • They are equipped with eyebolts and spring-return.
  • Aluminum pulling jacks are almost half the weight of steel pulling jacks.
  • This Jack is suitable for shipyards, large construction sites, such as welding jobs.

Hydraulic Shop press

  • Capacity : 20 - 200 tons
  • Maximum Pressure : 700 kgf/cm2
  • When pulling and pushing of bearings, gears, couplings, and assembling of products

Hydraulic Pullers

  • Capacity : 10 - 50 tons
  • Stroke : 150mm
  • Maximum Pressure : 700kgf/cm2
  • Hydraulic pullers are used when removing bearing, gear or pully from shafts

Bolt Tensioners

  • Capacity : 13.5 - 309 tons
  • Stroke : 4 - 10mm
  • Bolt Range : M20 - M100
  • Maximum Pressure : 700 - 1500kgf/cm2
  • Fitted with single acting spring return cylinders for use of Bolts/Nuts connection